  
|
Coram Tube Walk In Shower Panel With Angled Brace
Product Code : Coram Tube Walk In Shower Panel Angled Brace
Coram Tube Glass Shower Front Panel Pack With Angled Brace
Glass shower panels allow you to create a superb, minimalist shower enclosure - a ‘walk-in‘ style design, without the need for a shower door.
Coram glass shower panels are available with a choice of stylish fitting systems. They can all be fitted in a corner or an alcove and are fully reversible for left or right hand installations. There is a choice of three widths to provide different levels of screening, plus in a corner you also have the option of an additional 700mm end panel for maximum screening (This can be purchased separately please see drop down menu below. The sizes offered can be used in any combination as a front panel and an end panel).
Each panel is supplied with all the required fittings, including adjustable wall channels for out-of-true walls. The top tube (or pillar support - please see our Pillar listing for this product), which is supplied in a 1 metre length, can be easily cut to size during installation. All glass is toughened safety glass, which complies with EN12150 and EN12600. Shower panels can either be fitted on Coratech® Slimline 60 Showetrays, as shown, or on a suitable waterproof floor.
With This Tube Item the 8mm glass panel is held firmly in place by a precision engineered single tube and clamp attached to the top edge.
Front Panels With Straight Braces are available too - Please see our other Coram Tube Glass Shower Panel Listing With Straight Brace
Coram Tube Walk In Shower Screen
High Quality British Manufactured Shower Panel
8mm Thick Toughened Safety Glass
Choice Of Glass Finish: Clear, Satin Finish, Modesty Panel Glass
Available Lengths: 700mm, 800mm, 900mm, 1000mm
These four sizes can be used in any combination, i.e. as Front or End panels. For example, if you want a 1000mm Front Panel and a 700mm End Panel, then you will need to purchase one of each size from the drop down menu below.
Can Be Fitted To Shower Trays (These can be purchased separately please see our shower tray section) Or Can Be Fitted To Direct To Wetroom Plinths
Chrome Finished Tube Support
20mm Wall Channel Adjustment For Out-Of-True Walls
Height Including Tube 1963mm Excluding Tray (1900mm to top of glass)
20MM - 90 degrees corner joint for two panels /chrome can be used on its own to join two glass panels. This can be used on either TUBE or PILLAR panels. This can be purchased separately below.
10 Year Coram Guarantee
*N.B. Maximum width of panels is 800mm when used on a 1200mm showertray in an
alcove, or with an end panel in a corner, in order to allow a 400mm minimum gap for access. Please check that this is sufficient when planning your installation
|
